PeartPedestrian barriers are available in a wide range of specifications to suit all site conditions. Pedestrian barriers are generally 2.0m long and 1.05m in height with the framework constructed from 50 x 30mm rectangular hollow section. Infill panels, in-line or angled, are designed to provide road users the best view of traffic and pedestrian movement. Panels can be manufactured to a radius to meet the requirements of site and are hot dip galvanised to BS EN ISO 1461:1999 after manufacture.

Features and Benefits

Barrier Configuration

PeartPedestrian barriers are available in a range of configurations:

Pattern one
Infill panel from 12 – 22mm diameter bar.
Barrier supplied fully welded.

Pattern two
Infill panel from 25 x 25mm rolled
hollow section. Barrier supplied fully welded.

Pattern three
Infill panel from 12 – 22mm diameter bar.
Barrier supplied fully welded.

Pattern four
Infill panel from 12 – 22mm diameter bar.
Barrier supplied in kit form for assembly on site.

Patterns

And with a range of infill patterns:

 
 Standard infill

 
 Staggered infill, type X

 
 Staggered infill, type Y

 Staggered infill, type Z

A range of infill panels can be manufactured from 12 – 22mm diameter bar and from 13mm square section to ensure good visability through the barriers. Specifications suggested are for general purpose barriers and can be changed to meet specific site conditions.

PDF Brochure

Download the full PDF brochure for PeartPedestrian barriers*

*Requires Adobe Acrobat Reader.